LCR Meters available from Global Test Equipment for purchase, rent or lease. https://4gte.com/product-category/test-meters/lcr-impedance-meters/ Service, Solutions, Satisfaction Tue, 12 Aug 2025 13:22:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://4gte.com/wp-content/uploads/2025/05/logowithouttext-resized-250-x-250-100x100.gif LCR Meters available from Global Test Equipment for purchase, rent or lease. https://4gte.com/product-category/test-meters/lcr-impedance-meters/ 32 32 BK Precision 895 1 MHz LCR Meter https://4gte.com/products/bk-precision-895-1-mhz-lcr-meter/ Wed, 01 May 2024 13:26:16 +0000 https://4gte.com/?post_type=product&p=65716 BK Precision 895 1 MHz LCR Meter

 

The post BK Precision 895 1 MHz LCR Meter appeared first on Global Test Equipment.

]]> BK Precision 895 1 MHz LCR Meter

The post BK Precision 895 1 MHz LCR Meter appeared first on Global Test Equipment.

]]> Keysight 42942A Terminal Adapter, 40 Hz to 110 MHz https://4gte.com/products/hp-agilent-42942a-terminal-adapter-40-hz-to-110-mhz/ Fri, 10 Aug 2018 11:43:30 +0000 http://globaltest.wpengine.com/?post_type=product&p=28390 The 42942A terminal adapter converts the 4294A four terminal-pair configuration into a 7mm terminal configuration. As a result, test fixures with a 7 mm terminal connector can be used with the 4294A.

The post Keysight 42942A Terminal Adapter, 40 Hz to 110 MHz appeared first on Global Test Equipment.

]]> The post Keysight 42942A Terminal Adapter, 40 Hz to 110 MHz appeared first on Global Test Equipment.

]]> Keysight 42941A Impedance Probe Kit, 40 Hz to 110 MHz https://4gte.com/products/hp-agilent-42941a-impedance-probe-kit-40-hz-to-110-mhz/ Fri, 10 Aug 2018 11:43:30 +0000 http://globaltest.wpengine.com/?post_type=product&p=28388 The 42941A Impedance Probe Kit used with the 4294A provides the capability to perform in-circuit measurements (printed circuit patterns, the input/output impedance of circuits, etc.) with better accuracy and wider impedance coverage from 40 Hz to 110 MHz. In-circuit measurements can improve cycle time in a design environment, or reduce the cost of rework in a production environment.

The post Keysight 42941A Impedance Probe Kit, 40 Hz to 110 MHz appeared first on Global Test Equipment.

]]> The post Keysight 42941A Impedance Probe Kit, 40 Hz to 110 MHz appeared first on Global Test Equipment.

]]> Keysight 4294A Precision Impedance Analyzer, 40 Hz to 110 MHz https://4gte.com/products/hp-agilent-4294a-precision-impedance-analyzer-40-hz-to-110-mhz-with-option-1d5/ Fri, 10 Aug 2018 11:43:22 +0000 http://globaltest.wpengine.com/?post_type=product&p=28383 The 4294A precision impedance analyzer is an integrated solution for efficient impedance measurement and analysis of components and circuits. The 4294A covers a broader test-frequency range (40 Hz to 110 MHz) with Basic impedance accuracy:+/-0.08 %. Excellent High Q/Low D accuracy enables analysis of low-loss components. The wide signal-level ranges enable device evaluation under actual operating conditions. The test signal level range is 5m V to 1 Vrms or 200 uA to 20m Arms, and the DC bias range is 0 V to +/-40 V or 0m A to +/-100m A. Advanced calibration and error compensation functions eliminate measurement error factors when performing measurements on in-fixture devices. The 4294A is a powerful tool for design, qualification and quality control, and production testing of electronic components. Circuit designers and developers can also benefit from the performance/functionality offered.

The post Keysight 4294A Precision Impedance Analyzer, 40 Hz to 110 MHz appeared first on Global Test Equipment.

]]> Basic accuracy

Basic impedance accuracy: +/- 0.08 %

Frequency

40 Hz to 110 MHz

More features

Accurate measurement over wide impedance range and wide frequency range
Powerful impedance analysis function
Ease of use and versatile PC connectivity

The post Keysight 4294A Precision Impedance Analyzer, 40 Hz to 110 MHz appeared first on Global Test Equipment.

]]> Keysight 4395A Network/Spectrum/Impedance Analyzer, 10 Hz to 500 MHz https://4gte.com/products/hp-agilent-4395a-network-spectrum-impedance-analyzer-10-hz-to-500-mhz/ Fri, 10 Aug 2018 11:38:48 +0000 http://globaltest.wpengine.com/?post_type=product&p=26304 The Agilent 4395A provides excellent vector network, spectrum, and optional impedance measurements for lab and production applications. Gain, phase, group delay, distortion, spurious, CN, and noise measurements often required for evaluating components and circuits can be measured using one instrument.

When combined with a test set, the Agilent 4395A provides reflection measurements, such as return loss, SWR, and S parameters. As a vector network analyzer, the Agilent 4395A operates from 10Hz to 500MHz with 1 mHz resolution; and its integrated synthesized source provides -50 to + 15dBm of output power with 0.1 dB resolution. The dynamic magnitude and phase accuracy are +/-0.05dB and +/-0.3deg. so that it can accurately measure gain and group delay flatness, which are becoming more important in modern electronics systems.

As a spectrum analyzer, the Agilent 4395A operates from 10 Hz to 500 MHz with resolution bandwidths (RBWs) spanning 1 Hz to 1 MHz in a 1-3-10 steps. A fully-synthesized local oscillator allows stable and accurate frequency analysis. Direct A/D conversion (no LOG amplifier is used) results in +/-0.8 dB level accuracy (@50 MHz, -20 dBm). Noise sidebands fall below -100 dBc/Hz @ 100 kHz offset from carriers, while sensitivity is -145 dBm/Hz at 10 MHz.

The post Keysight 4395A Network/Spectrum/Impedance Analyzer, 10 Hz to 500 MHz appeared first on Global Test Equipment.

]]> Full-vector network and spectrum measurement and analysis
Wide dynamic range network measurement with fast sweep speeds
+/-0.05 dB /+/-0.3deg dynamic magnitude/phase accuracy
Extremely fast narrowband spectrum measurement
Impedance analysis option and test kit available
-145 dBm/Hz sensitivity for spectrum analysis
Built-in IBASIC for easy test automation
Time-gated spectrum analysis option
Color TFT display and built-in disk drive/RAM disk

The post Keysight 4395A Network/Spectrum/Impedance Analyzer, 10 Hz to 500 MHz appeared first on Global Test Equipment.

]]> Keysight 4339B High Resistance Meter https://4gte.com/products/hp-agilent-4339b-high-resistance-meter/ Fri, 10 Aug 2018 11:38:38 +0000 http://globaltest.wpengine.com/?post_type=product&p=26290 The Agilent 4339B high-resistance meter is Agilent Technologies' most advanced tool for making precision high-resistance measurements.

The post Keysight 4339B High Resistance Meter appeared first on Global Test Equipment.

]]> Wide measurement range: 1E3 ohm to 1.6E16 ohm
Stable test fixtures: resistivity cell, component test fixture
High-speed measurement: 10 ms
Test sequence programming
Resistivity calculations
Grounded DUT measurement

The post Keysight 4339B High Resistance Meter appeared first on Global Test Equipment.

]]> Keysight 4291A RF Impedance/Material Analyzer https://4gte.com/products/hp-agilent-4291a-rf-impedance-material-analyzer/ Fri, 10 Aug 2018 11:38:38 +0000 http://globaltest.wpengine.com/?post_type=product&p=26286 The HP/Agilent 4291A uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range. A 1.8m error-less cable connects the HP/Agilent 4291A analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT.

The post Keysight 4291A RF Impedance/Material Analyzer appeared first on Global Test Equipment.

]]> Basic accuracy of 0.8%
Internal generator sweeps from 1 MHz to 1.8 GHz with 1 mHz resolution
Gain-Phase measurements include amplitude, phase, and group delay
Impedance measurements include |Z|, |Y|, phase, R, X, G, B, Lp, Ls, Cp, Cs,
D, Q, deviation, and deviation %
DC bias to ±35 V
GPIB

The post Keysight 4291A RF Impedance/Material Analyzer appeared first on Global Test Equipment.

]]> Keysight 4286A – RF LCR Meter with Test Fixture https://4gte.com/products/hp-agilent-keysight-4286a-rf-lcr-meter-with-test-fixture/ Fri, 10 Aug 2018 11:38:38 +0000 http://globaltest.wpengine.com/?post_type=product&p=26284 The HP/Agilent 4286A RF LCR Meter offers accurate and reliable measurements. The HP 4286A employs a RF I-V measurement technique, as opposed to the reflection measurement technique, yielding an accurate impedance measurement that extends way beyond 50 Ohms.

The 4286A provides you with an accurate impedance measurement capability for RF inductors, especially for nH values. Q measurement accuracy has been improved due to HP's advanced calibration technique; typical Q accuracy is 6% @ 100 MHz (Q=100). You can reduce the design uncertainty by measuring your devices true impedance values at operating conditions.

The post Keysight 4286A – RF LCR Meter with Test Fixture appeared first on Global Test Equipment.

]]>
  • Frequency range of 1MHz to 1GHz
  • Frequency resolution of 10kHz
  • Output voltage level from 10mVrms to 1Vrms
  • Output current level from 200uA to 20mA
  • 20 different measurement parameters

    • HP/Agilent Keysight 4286A – RF LCR Meter with Test Fixture

    The post Keysight 4286A – RF LCR Meter with Test Fixture appeared first on Global Test Equipment.

    ]]>         Keysight 4284A Precision LCR Meter, 20 Hz to 1 MHz https://4gte.com/products/hp-agilent-4284a-precision-lcr-meter-20-hz-to-1-mhz/ Fri, 10 Aug 2018 11:38:38 +0000 http://globaltest.wpengine.com/?post_type=product&p=26282 The Agilent 4284A precision LCR meter is a cost-effective solution for component and material measurement. The wide 20 Hz to 1 MHz test frequency range and superior test-signal performance allow the Agilent 4284A to test components to the most commonly-used test standards, such as IEC/MIL standards, and under conditions that simulate the intended application. Whether in research and development, production, quality assurance, or incoming inspection, the Agilent 4284A will meet all of your LCR meter test and measurement requirements.

    The post Keysight 4284A Precision LCR Meter, 20 Hz to 1 MHz appeared first on Global Test Equipment.

    ]]>     20 Hz to 1 MHz, with over 8,600 test frequencies
    0.05% basic accuracy, 6-digit resolution
    Constant V or I test signal level
    20 Vrms level option (Option 001)
    40 Adc with the Agilent 42841A
    List sweep measurement capability

    The post Keysight 4284A Precision LCR Meter, 20 Hz to 1 MHz appeared first on Global Test Equipment.

    ]]>         Keysight 42841A Bias Current Source https://4gte.com/products/hp-agilent-42841a-bias-current-source/ Fri, 10 Aug 2018 11:38:38 +0000 http://globaltest.wpengine.com/?post_type=product&p=26280 The Agilent 42841A is a bias current source for use with the Agilent 4284A or Agilent 4285A. The configured measurement system has the capability to perform DC BIAS current measurements of up to 40A in the 20Hz to 1MHz frequency range and up to 10A in the 75kHz to 30MHz frequency range.

    The post Keysight 42841A Bias Current Source appeared first on Global Test Equipment.

    ]]>     The Agilent 42841A is a bias current source for use with the Agilent 4284A or Agilent 4285A. The configured measurement system has the capability to perform DC BIAS current measurements of up to 40A in the 20Hz to 1MHz frequency range and up to 10A in the 75kHz to 30MHz frequency range.

    The post Keysight 42841A Bias Current Source appeared first on Global Test Equipment.

    ]]>