The Keysight E6234A is a C-size, 2-slot, message-based, PC controller and can be used in either the E84XXA series mainframes, the E1401B or the E1421B Mainframe. Embedding the controller in the VXI chassis allows direct computer access of other VXI devices, system memory, and triggers as though they were part of the controller hardware. Therefore, you don’t need a separate command module.

The E6234A accesses the VXIbus with a full 32-bit wide data path (D32) for highest performance. For an alternative data path into and out of your VXI system, LAN connection is standard on this module. It has one additional EXM slot for inclusion of an additional interface that can be ordered separately.

This product includes a 166 MHz processor, 2.16 GB disk, 3.5 inch floppy drive, 32 MB RAM, SCSI-2, RS-232, GPIB, ECP parallel port, SVGA I/F with 2 MB VRAM, two PS-2 ports, and one EXM expansion slot.

The post Keysight E36234A DC Power Supply, Dual Output, Auto-Range: 2 x 60 V, 10 A, 400 W: LAN, USB – NEW appeared first on Global Test Equipment.

Output ratings

• Voltage: 0 to 60 V
• Current: 0 to 50 A

Programming accuracy at 25°C ±5°C

• Voltage: 0.035%, +40 mV
• Current: 0.2%, +85 mA

Ripple & noise 20 Hz to 20 MHz

• Voltage rms: 8 mV
• Voltage Peak-to-Peak: 40 mV
• Current rms: 25 mA

Readback accuracy at 25°C ±5°C

• Voltage: 0.08%, +20 mV
• Current: 0.36%, +35 mA

The post Keysight 6032A-120 DC Power Supply, 60V, 50A, 1064W appeared first on Global Test Equipment.

The post Keysight 6253A-011/040 DC Power Supply, 20V, 3A, 120W, Dual Output appeared first on Global Test Equipment.

Maximum Total Output Power (= Sum of Total Module Output Power)

• 1200 W when operating from 200 – 240 VAC input
• 600 W when operating from 100 – 120 VAC input

AC Input

• Nominal Input Ratings: 100 VAC – 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC – 264 VAC
• Power Consumption: 3000 VA typical
• Fuse Internal fuse (not customer accessible)

Protection Response Characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

The post Keysight N6702C Low-Profile Modular Power System Mainframe, 1200W, 4 Slots appeared first on Global Test Equipment.

Output Ratings

• Voltage: 20 V
• Current: 50 A
• Power: 300 W

Programming Accuracy (at 23°C ±5°C)

• Voltage high range: 0.03% + 5 mV
• Current high range: 0.1% + 15 mA

Ripple & Noise (20 Hz to 20 MHz)

• Voltage peak-to-peak: 5 mV
• Voltage rms: 1 mV
• Current rms: 10 mA

The post Keysight N6763A Precision DC Power Module, 20V, 50A, 300W appeared first on Global Test Equipment.

• AC, DC and AC+DC power source
• 3-Phase capability using multiple AC sources and 3-Phase kit (TL983P-KIT)
• Low total harmonic distortion meets the IEC 61000-3-2 standard
• Comprehensive measurement capabilities Vrms, Arms, Vdc, +Apk, -Apk, inrush current, frequency, power factor, apparent power, reactive power, true power, and crest factor
• 0.98 power factor at AC input stage
• Built-in standard waveforms sine, square and clipped sine
• 30 built-in THD waveforms
• Amplifier mode with 1.2 kHz bandwidth for generating user-defined arbitrary waveforms
• Step, List and Pulse modes for generating power line disturbance (PLD) simulations
• List mode supports 10 user-defined programs with up to 100 programmable steps
• Generate custom harmonic waveforms on a PC and download them to the instrument’s 5 non-volatile memory locations
• Digital I/O port supporting external trigger, transient indication, failure status indication, remote inhibit, RS232, and external analog output level programming interface
• Comprehensive protection modes OVP, OCP,OPP, OTP, fan failure, output timer and key lock
• Downloadable LabVIEW^TM driver and soft panel software for remote control
• Standard USB (USBTMC-compliant), RS232, LAN, and GPIB remote interfaces

The post BK Precision 9833 AC Power Source, 3000VA New appeared first on Global Test Equipment.

The BK Precision 9129B Programmable Triple-Output DC Power Supply features isolated outputs that can be adjusted independently or combined in series or parallel to output higher voltage or current. Front panel keys and the encoder knob provide efficient options to adjust the voltage and current of any of the 3 outputs, enable or disable parallel, series or tracking mode, and store/recall operating states.

• Output Voltage: 0-30V (2), 0-5V (1)
• Output Current: 0-3A

The post BK Precision 9129B Triple Output DC Power Supply, 30V, 3A, 105Wv appeared first on Global Test Equipment.

The Agilent N3300A is a full-rack width mainframe with 6-slots that accepts combinations of N330x user-installable load modules (150 W to 600 W) for easy system configuration and future reconfiguration. The N3300A holds up to six N3302A, N3303A, N3304A, and N3307A load modules, or up to three N3305A and N3306A load modules, allowing up to 1,800 watts of total maximum power.

A single GPIB address is all you need for complete control and read-back of all load modules within a single N3300A mainframe. The N330xA Series of DC electronic loads provides fast operation and the accurate programming and read-back needed for high-volume DC power supply test systems.

The post Keysight N3300A-908 DC Load Mainframe, 6 Slots, 1800W appeared first on Global Test Equipment.

Global Test Equipment

The post BK Precision 1856D 3.5 GHz Frequency Counter appeared first on Global Test Equipment.

• Output sequencing
• Low ripple and noise
• High-accuracy read-back of voltage and current over GPIB
• Standard Commands for Programmable Instruments (SCPI)
• VXI plug&play drivers
• Optional keyboard and display unit
• Built-in self-test

Accessories

Options

The post Keysight 66104A-J09 DC Power Module 55V, 3A, 165W appeared first on Global Test Equipment.