The MXA is built for speed: it helps you shorten test times with capabilities such as rapid local measurements, display updates, and marker peak searches. Fast sweep speed optimizes your spurious measurements. It’s also built for performance: you can accurately characterize device performance by measuring small signals in the presence of large ones with up to 116 dB (typical) third-order dynamic range. The best-in-class phase noise (–114 dBc/Hz at 10 kHz offset) enables you to achieve the lowest internal EVM floor for cellular communication standards like LTE. With deep capture memory, you can perform thorough signal characterization by capturing longer I/Q samples from signals-under-test.

The post Keysight N9020A-508/B25/B40/MPB/RTL/1FP/2FP/3FP/4FP/5FP 8.4 GHz MXA Signal Analyzer 20 Hz to  8.4 GHz appeared first on Global Test Equipment.

The post Keithley System 40 C203-F RF/Microwave Signal Routing System with F Module appeared first on Global Test Equipment.

The MP1800A supports wideband bit rates from 0.1 to 32.1 Gbit/s for versatile signal integrity analysis applications up to 32 Gbit/s, such as 100GbE (25G x 4), OTU-4 (28G x 4), 32G DP-QPSK, CEI-28G, 32G FC, and Infiniband EDR (26 G). Combination with the MP1821A and MP1822A supports BER tests up to 56 Gbit/s for next-generation R&D, including CEI-56G-VSR.

1, 2, or 4 channels can be selected per PPG or ED module, supporting multi-channel synchronization for up to 8 channels at 32 Gbit/s. AOC, QSFP+, CXP and CFP modules can be measured simultaneously, and crosstalk and skew tolerance can be evaluated.

Combined use with the MP1825B 4Tap Emphasis generates 2 and 3-tap pre-emphasis signals for high-speed interconnects up to 32.1 Gbit/s, such as CEI-28G, 32G FC and Infiniband EDR (26G), as well as 4-tap signals. The pre-emphasis effect is easily confirmed because each tap can be changed independently.
Installing the MP1825B 4Tap emphasis as a remote head for the MP1800A close to the DUT keeps cables short and signal quality high. Precision signal integrity analysis is supported by pre-emphasis corrected accurate Jitter Tolerance tests with transparent input data and clock jitter .

The all-in-one MP1800 series outputs high-amplitude signals up to 3.5 Vp-p for evaluation of EA and EML modulators, improving optical modulator R&D, line productivity, and quality.
With support for optical interfaces, the MP1800A is ideal for IEEE802.3-2005 10GBASE-L and E stressed receiver conformance tests. The high-accuracy auto-calibration function assures excellent measurement reproducibility and interconnectivity.
In addition to generating IEEE and ITU-T burst data and auxiliary signals for evaluating E-PON, G-PON, and 10GE-PON optical modules, automated timing of the burst data and auxiliary signal outputs shortens evaluation times and increases evaluation quality.

Accessories

Options

The post Anritsu MP1800A Signal Quality Analyzer Mainframe, 0.1 to 32.1 Gbps Options 001/002/016/007 appeared first on Global Test Equipment.

The Agilent 83480A digital communications analyzer family is a powerful and versatile instrument for waveform analysis in research, development, production, and evaluation testing throughout the telecommunications and datacommunications industries. The instrument has been designed to give you the highest accuracy, measurement speed, and ease-of-use for characterizing high-speed digital communications waveforms. The Agilent 83480A is a modular platform that accepts up to two plug-in modules. These modules are designed to meet your specific test needs. Integrated optical channels include calibrated reference receivers for 155, 622, 1063, 1250, 2488, and 9953 Mbit/s SDH/SONET, Fibre Channel, or Gbit Ethernet transmitter test. Electrical channels have up to 50 GHz bandwidths. TDR and TDT modules are available for optimization of circuit board transmission lines. Data acquisition and measurement analysis are performed in parallel, enabling the Agilent 83480A to achieve outstanding measurement throughput. The digital communications analyzer provides fast, repeatable communications waveform performance analysis with automated pulse and eye-diagram statistical measurements. Optical or electrical conformance tests to both user-defined and industry standard eye-diagram masks or pulse templates are easily executed.

The post Keysight 83480A Digital Communications Analyzer with 54754A appeared first on Global Test Equipment.

The MP1800A supports wideband bit rates from 0.1 to 32.1 Gbit/s for versatile signal integrity analysis applications up to 32 Gbit/s, such as 100GbE (25G x 4), OTU-4 (28G x 4), 32G DP-QPSK, CEI-28G, 32G FC, and Infiniband EDR (26 G). Combination with the MP1821A and MP1822A supports BER tests up to 56 Gbit/s for next-generation R&D, including CEI-56G-VSR.

1, 2, or 4 channels can be selected per PPG or ED module, supporting multi-channel synchronization for up to 8 channels at 32 Gbit/s. AOC, QSFP+, CXP and CFP modules can be measured simultaneously, and crosstalk and skew tolerance can be evaluated.

Combined use with the MP1825B 4Tap Emphasis generates 2 and 3-tap pre-emphasis signals for high-speed interconnects up to 32.1 Gbit/s, such as CEI-28G, 32G FC and Infiniband EDR (26G), as well as 4-tap signals. The pre-emphasis effect is easily confirmed because each tap can be changed independently.
Installing the MP1825B 4Tap emphasis as a remote head for the MP1800A close to the DUT keeps cables short and signal quality high. Precision signal integrity analysis is supported by pre-emphasis corrected accurate Jitter Tolerance tests with transparent input data and clock jitter .

The all-in-one MP1800 series outputs high-amplitude signals up to 3.5 Vp-p for evaluation of EA and EML modulators, improving optical modulator R&D, line productivity, and quality.
With support for optical interfaces, the MP1800A is ideal for IEEE802.3-2005 10GBASE-L and E stressed receiver conformance tests. The high-accuracy auto-calibration function assures excellent measurement reproducibility and interconnectivity.
In addition to generating IEEE and ITU-T burst data and auxiliary signals for evaluating E-PON, G-PON, and 10GE-PON optical modules, automated timing of the burst data and auxiliary signal outputs shortens evaluation times and increases evaluation quality.

Accessories

Options

The post Anritsu MP1800A Signal Analyzer with Options 001, 002 and 015 appeared first on Global Test Equipment.

The MXA is built for speed: it helps you shorten test times with capabilities such as rapid local measurements, display updates, and marker peak searches. Fast sweep speed optimizes your spurious measurements. It’s also built for performance: you can accurately characterize device performance by measuring small signals in the presence of large ones with up to 116 dB (typical) third-order dynamic range. The best-in-class phase noise (–114 dBc/Hz at 10 kHz offset) enables you to achieve the lowest internal EVM floor for cellular communication standards like LTE. With deep capture memory, you can perform thorough signal characterization by capturing longer I/Q samples from signals-under-test.

The post Keysight N9020A MXA Signal Analyzer, 20 Hz up to 8.4 GHz With 508/B25/P08/ PC4/PFR/SSD/W7X Options – OEM Calibrated appeared first on Global Test Equipment.

B12-B21-B54-B56-B66-B68-B96-U65-K16-K17-K20-K21-K22-K23-K24-K27-K28-K42-K43-K56-K57-K58-K61-         K62-K63-K65-K66-K67-K68-K69-K92-K9

Extremely high-speed testing
Highly accurate measurements
Modular future-proof design
Comprehensive spectrum analyzer
Fast switching between networks
R&S CMU200V02 for mobile phone testing with network emulation – the signaling specialist
R&S CMU200V10 for high-end servicing of mobile phones – the service tester specialist
R&S CMU200V30 for non-signaling production testing of mobile phones – the calibration specialist

The post Rohde & Schwarz CMU200 Universal Radio Communication Tester with Options – see full list below appeared first on Global Test Equipment.

The post Keysight 70842A Error Detector Module appeared first on Global Test Equipment.

The post Keysight 89441A (89410A) VSA with W-CDMA Capability, DC to 2.65 GHz w/ Options 1C2/AY9/AYA/AYB/AYH/UFG appeared first on Global Test Equipment.

GSM900
E-GSM
UIC – European train radiotelephony
GSM1800
GSM1900 optionally

The main applications are:
Module testing in production
Final testing with Abis control
Installation with Abis control
Service with test mobile functionality

The post Rohde & Schwarz CMD57 Digital Radio Communication Tester w/B1/B3/B4/B41/B42/B43/B6/B61/B19/U5/U10/U11 appeared first on Global Test Equipment.