Acterna - Global Test Equipment https://4gte.com/brand/acterna/ Service, Solutions, Satisfaction Thu, 25 Sep 2025 17:03:29 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://4gte.com/wp-content/uploads/2025/05/logowithouttext-resized-250-x-250-100x100.gif Acterna - Global Test Equipment https://4gte.com/brand/acterna/ 32 32 Acterna (TTC) 41754 Repeater Extender https://4gte.com/products/acterna-ttc-41754-repeater-extender/ Fri, 10 Aug 2018 11:43:07 +0000 http://globaltest.wpengine.com/?post_type=product&p=28237 Repeater Extender for T209OSP Analyzers that is a handheld extender packaged in a rugged plastic case, providing easy test access to T1 signals at span repeater housings. Perform out-of-service testing and monitoring of T1 signals along repeater spans.

The post Acterna (TTC) 41754 Repeater Extender appeared first on Global Test Equipment.

]]>
The post Acterna (TTC) 41754 Repeater Extender appeared first on Global Test Equipment.

]]>
Acterna (TTC) T209OSP Ruggedized T1 Test Set w/HDSL https://4gte.com/products/acterna-ttc-t209osp-ruggedized-t1-test-set-w-hdsl/ Fri, 10 Aug 2018 11:34:08 +0000 http://globaltest.wpengine.com/?post_type=product&p=23782 Options: 1: DC Measurements Option 2: TDR Measurements Option to identify cable impairments 3: Channel Monitor Option for simultaneously monitoring ABCD signaling bits of all 24 timeslots 4: Advanced Stress Patterns Option allows stress repeater ALBO circuits with 55 OCTET, T1 DALY and other long user patterns as recommended by the ANSI T1.403 standard 5: Enhanced ESF Option for decode ESF one-second broadcast PRM to verify remote, in-service circuit performance 6: Smart Loopback/Command Codes to send and receive commands for maintenance switch operation 7: Fractional T1 0ption for performing bit error rate tests on selected channels 8: HDSL/ISDN/DDS Measurement Option to perform loss measurements at 28kHz, 40kHz, 48kHz, 82kHz, 163kHz, 196kHz, and 392kHz

The post Acterna (TTC) T209OSP Ruggedized T1 Test Set w/HDSL appeared first on Global Test Equipment.

]]>
Options: 1: DC Measurements Option 2: TDR Measurements Option to identify cable impairments 3: Channel Monitor Option for simultaneously monitoring ABCD signaling bits of all 24 timeslots 4: Advanced Stress Patterns Option allows stress repeater ALBO circuits with 55 OCTET, T1 DALY and other long user patterns as recommended by the ANSI T1.403 standard 5: Enhanced ESF Option for decode ESF one-second broadcast PRM to verify remote, in-service circuit performance 6: Smart Loopback/Command Codes to send and receive commands for maintenance switch operation 7: Fractional T1 0ption for performing bit error rate tests on selected channels 8: HDSL/ISDN/DDS Measurement Option to perform loss measurements at 28kHz, 40kHz, 48kHz, 82kHz, 163kHz, 196kHz, and 392kHz

The post Acterna (TTC) T209OSP Ruggedized T1 Test Set w/HDSL appeared first on Global Test Equipment.

]]>
Acterna (TTC) 44116 HDSL Repeater Power Supply for T209OSP https://4gte.com/products/acterna-ttc-44116-hdsl-repeater-power-supply-for-t209osp/ Fri, 10 Aug 2018 11:31:44 +0000 http://globaltest.wpengine.com/?post_type=product&p=22731 Provides the span power necessary and the ability to access a T1 span at the main distruibution frame(MDF). Satisfies pre-installation HDSL Loop Test requirements for signal quality for network equipment. Verifies that cable pairs can support HDSL traffic,the doubler is working/installed properly, and can perform a bit error rate test on the span when used with TTC T209OSP.

The post Acterna (TTC) 44116 HDSL Repeater Power Supply for T209OSP appeared first on Global Test Equipment.

]]>
The post Acterna (TTC) 44116 HDSL Repeater Power Supply for T209OSP appeared first on Global Test Equipment.

]]>
Acterna 80-10210-01 Fireberd RS-449 Cable DTE-DCE Adaptor https://4gte.com/products/acterna-80-10210-01-fireberd-rs-449-cable-dte-dce-adaptor/ Fri, 10 Aug 2018 11:17:00 +0000 http://globaltest.wpengine.com/?post_type=product&p=23931 Acterna 80-10210-01 Fireberd RS-449 Cable DTE-DCE Adaptor

The post Acterna 80-10210-01 Fireberd RS-449 Cable DTE-DCE Adaptor appeared first on Global Test Equipment.

]]>
Acterna 80-10210-01 Fireberd RS-449 Cable DTE-DCE Adaptor

The post Acterna 80-10210-01 Fireberd RS-449 Cable DTE-DCE Adaptor appeared first on Global Test Equipment.

]]>
TTC/Acterna (JDSU) FIREBERD 6000A Communications Analyzer w/6004/6005/6006/6007/6008 https://4gte.com/products/ttc-acterna-jdsu-fireberd-6000a-communications-analyzer-w-6004-6005-6006-6007-6008/ Tue, 10 Jul 2018 12:18:47 +0000 http://globaltest.wpengine.com/?post_type=product&p=26387 The TTC FIREBERD 6000 Communications Analyzer brings advanced testing capabilities to today’s data networks, enabling you to maximize your testing capabilities and minimize your training costs. Whether your test requirements include Async or ATM testing, physical layer and data link layer analysis, or generation and measurement of the jitter tolerance of your T1 or 2M circuits, the FIREBERD 6000 gives you the power to analyze most network interfaces found within your network.

With an intuitive, menu-driven test methodology, the FIREBERD 6000 performs traditional bit error analysis, frame and cell generation, along with signal, performance and timing measurements. The FIREBERD 6000 is fully programmable, with customized printouts, programmable user patterns, frequency synthesizer, and user-defined flow control. It’s a great way to protect your network.

The post TTC/Acterna (JDSU) FIREBERD 6000A Communications Analyzer w/6004/6005/6006/6007/6008 appeared first on Global Test Equipment.

]]>
  • Portable WAN analyzer with automated and remote testing.
  • Easy-to-use, menu-driven user interface.
  • Test ATM, frame relay, ISDN, T1, and more.
  • Detect hard-to-find BER problems quickly.
  • Fast packet testing.
  • ISDN testing.
  • T- and E-carrier testing.
  • DTE/DCE datacom testing.
  • Accessories

    Part Number Description
    Qty
    Power Cord
    1
    50-12120-01 Reference Manual
    1

    Options

    Option Description
    6001 DS1 Wideband Jitter Measurement
    6002 DS1 Jitter Spectral Analysis
    6003 DS1 Jitter Generation
    6004 Clock Recovery
    6005 IEEE-488 Remote Control
    6006 Precision Time Base
    6007 G.703 Wideband Jitter Measurement and Generation
    6008 G.703 Jitter Spectral Analysis
    6009 ANSI T1.403 PRMs
    6010 Frame Relay New Unit Option
    6011 Frame Relay Factory Upgrade
    220-V Setting

    The post TTC/Acterna (JDSU) FIREBERD 6000A Communications Analyzer w/6004/6005/6006/6007/6008 appeared first on Global Test Equipment.

    ]]>
    TTC/Acterna (JDSU) FIREBERD 6000A Communications Analyzer w/6005 https://4gte.com/products/ttc-acterna-jdsu-fireberd-6000a-communications-analyzer/ Tue, 10 Jul 2018 12:18:47 +0000 http://globaltest.wpengine.com/?post_type=product&p=33370 The TTC FIREBERD 6000 Communications Analyzer brings advanced testing capabilities to today’s data networks, enabling you to maximize your testing capabilities and minimize your training costs. Whether your test requirements include Async or ATM testing, physical layer and data link layer analysis, or generation and measurement of the jitter tolerance of your T1 or 2M circuits, the FIREBERD 6000 gives you the power to analyze most network interfaces found within your network.

    With an intuitive, menu-driven test methodology, the FIREBERD 6000 performs traditional bit error analysis, frame and cell generation, along with signal, performance and timing measurements. The FIREBERD 6000 is fully programmable, with customized printouts, programmable user patterns, frequency synthesizer, and user-defined flow control. It’s a great way to protect your network.

    The post TTC/Acterna (JDSU) FIREBERD 6000A Communications Analyzer w/6005 appeared first on Global Test Equipment.

    ]]>
  • Portable WAN analyzer with automated and remote testing.
  • Easy-to-use, menu-driven user interface.
  • Test ATM, frame relay, ISDN, T1, and more.
  • Detect hard-to-find BER problems quickly.
  • Fast packet testing.
  • ISDN testing.
  • T- and E-carrier testing.
  • DTE/DCE datacom testing.
  • Accessories

    Part Number Description
    Qty
    Power Cord
    1
    50-12120-01 Reference Manual
    1

    Options

    Option Description
    6001 DS1 Wideband Jitter Measurement
    6002 DS1 Jitter Spectral Analysis
    6003 DS1 Jitter Generation
    6004 Clock Recovery
    6005 IEEE-488 Remote Control
    6006 Precision Time Base
    6007 G.703 Wideband Jitter Measurement and Generation
    6008 G.703 Jitter Spectral Analysis
    6009 ANSI T1.403 PRMs
    6010 Frame Relay New Unit Option
    6011 Frame Relay Factory Upgrade
    220-V Setting

    The post TTC/Acterna (JDSU) FIREBERD 6000A Communications Analyzer w/6005 appeared first on Global Test Equipment.

    ]]>
    TTC Acterna T-BERD 310 Communications Analyzer 310-S, 310-11 https://4gte.com/products/ttc-acterna-jdsu-fireberd-6000a-communications-analyzer-4/ Wed, 17 Aug 2016 16:47:50 +0000 http://globaltest.wpengine.com/?post_type=product&p=41058 This unit includes: 310-S, 310-11

    The T-BERD 310 can be ordered with all testing options: ATM, SONET, DS3, DS1/DS0 or it can be configured to meet specific network testing requirements. Then, as technology and networks change, T-BERD 310 customers can quickly upgrade their test instrument by ordering additional functionality that meets new test requirements. In addition, these options can by installed in the field without affecting any of the T-BERD 310’s existing features. For example, if a customer uses the T-BERD 310 to verify DS3 circuits now, ATM, SONET, ORL, and DS1/DS0 test options can be added as needed, protecting past, present, and future investment.

    Features:

    SONET, DWDM, optical media testing, ATM, DS3 and DS1/DS0 testing power in one package
    Advanced error insertion
    Complete pulse shape analysis
    Jitter measurements

    The post TTC Acterna T-BERD 310 Communications Analyzer 310-S, 310-11 appeared first on Global Test Equipment.

    ]]>
    The post TTC Acterna T-BERD 310 Communications Analyzer 310-S, 310-11 appeared first on Global Test Equipment.

    ]]>
    Acterna-Communications ANT-20SE Advance Network Tester WANDEL-GOLTERMANN https://4gte.com/products/acterna-communications-ant-20se-advance-network-tester-wandel-goltermann/ Mon, 08 Aug 2016 20:38:30 +0000 http://globaltest.wpengine.com/?post_type=product&p=40984 The Acterna / JDSU ANT-20s built-in PC with its Windows based design makes integration and use of the instrument in various work environments simple and easy. Test results can be saved internally in the ANT-20 or on diskette and printed in report format on any standard printer. PC software such as Microsoft Excel or Word can also be used for documentation purposes. The ANT-20se's built-in help functions are easily accessible, delivering answers and technical information directly to the user.

    The post Acterna-Communications ANT-20SE Advance Network Tester WANDEL-GOLTERMANN appeared first on Global Test Equipment.

    ]]>
    Multi-rate transmission testing from DS1 to OC-192c and E1 to STM-64c
    Modular platform offering SONET, DSn, SDH, and ATM capabilities
    Large color touch screen display
    Intuitive, easy-to-use user interface
    Flexible integration into lab or manufacturing test environments
    Modular hardware and software concept
    Portable mainframe

    Applications:

    BERT and Performance testing – Test for DSn, PDH, SONET, and SDH signals support of bit error rate test for all standard bit rates along with performance tests according to the latest ITU-T recommendations
    Jitter and Wander analysis – Generation and analysis of jitter and wander for bit rates from 1.5 Mbps to 10 Gbps fully compliant to ITU-T Recommendation O.172
    Analysis of Tandem Connection Monitorig (TCM) – Verifies the proper implementation of TCM in your SDH network
    Comprehensive ATM testing – Tests ATM networks for correct operation and Quality of Service (QoS). Depending on the application, the ANT-20 has test solutions for permanent virtual circuits (PVC) and switched virtual circuits (SVC)
    Test Automation – Time and cost savings through automation. The CATS test sequencer is test automation software designed to run on the ANT-20’s built-in PC. It is the ideal tool for automating repeat test procedures
    Remote operation – Due to the Microsoft Windows-based design, the same software can be run on both the ANT-20 and on a laptop or PC, enabling complicated and time-consuming tests to be carried out remotely.
    Related Products

    The post Acterna-Communications ANT-20SE Advance Network Tester WANDEL-GOLTERMANN appeared first on Global Test Equipment.

    ]]>
    TTC Interceptor 1402S Communication Analyzer with Options 11, 12 https://4gte.com/products/ttc-acterna-jdsu-fireberd-6000a-communications-analyzer-3/ Mon, 25 Jul 2016 20:54:07 +0000 http://globaltest.wpengine.com/?post_type=product&p=40910 TTC Interceptor 1402S Communication Analyzer with Options 11, 12
    Data Rates:

    N X 64K
    2M / VC12
    8M
    34M
    140M/VC4
    SDH
    155M RX (ST Optical)

    The post TTC Interceptor 1402S Communication Analyzer with Options 11, 12 appeared first on Global Test Equipment.

    ]]>
    TTC Interceptor 1402S Communication Analyzer with Options 11, 12

    The post TTC Interceptor 1402S Communication Analyzer with Options 11, 12 appeared first on Global Test Equipment.

    ]]>
    TTC Interceptor 1402S Communication Analyzer Opts 1,2,5,6,8R-FC,8T-FC13 https://4gte.com/products/ttc-acterna-jdsu-fireberd-6000a-communications-analyzer-2/ Mon, 25 Jul 2016 20:47:36 +0000 http://globaltest.wpengine.com/?post_type=product&p=40907 TTC Interceptor 1402S Communication Analyzer Opts 1,2,5,6,8R-FC,8T-FC13
    Data Rates:

    N X 64K
    2M / VC12
    8M
    34M
    140M/VC4
    SDH
    155M RX (ST Optical)

    The post TTC Interceptor 1402S Communication Analyzer Opts 1,2,5,6,8R-FC,8T-FC13 appeared first on Global Test Equipment.

    ]]>
    TTC Interceptor 1402S Communication Analyzer Opts 1,2,5,6,8R-FC,8T-FC13

    The post TTC Interceptor 1402S Communication Analyzer Opts 1,2,5,6,8R-FC,8T-FC13 appeared first on Global Test Equipment.

    ]]>